High Sierra Resolved]

Comments

• SandyMcC Member Posts: 7,858

  October 2017

  I know someone who was trying. Let me see if she got it to work.
  
  

  Sandy McCauley
  Cutting with KNK Force, Maxx Air, Zing Orbit, Skycut C and D
  Over 90 free MTC videos: http://www.iloveknk.com/support/mtc-support/
  Latest MTC User Manuals: http://www.iloveknk.com/Support/user-manuals/

  0 · Share on FacebookShare on Twitter
• Crazy_Mr_Zing Member Posts: 3,638

  October 2017

  Firstly I know less than nothing about MAC
  
  I found this use at your own risk
  
  
  

  I Use Zing Air, Make The Cut - Pop Card Studio, WinXP- Win7 -Win10
  Paper Modellers I Revere Marc Hagan-Guirey ----- Yoshinobu Miyamoto ----- Peter Dahmen
  Gallery ID #26944 ----- Link to My Cloud Have a Look your Welcome to Make Use of the Files

  0 · Share on FacebookShare on Twitter
• leslie6111 Member Posts: 2,380

  October 2017

  I haven't upgraded yet and I also found references to High Sierra breaking wineskin - but don't know if Andy uses wine or wineskin and I have no clue on how to repackage MTC anyway.
  

  0 · Share on FacebookShare on Twitter
• SandyMcC Member Posts: 7,858

  October 2017

  My customer reported that it worked!!!!!!!!! Yay!!!!!!!!!!

  Sandy McCauley
  Cutting with KNK Force, Maxx Air, Zing Orbit, Skycut C and D
  Over 90 free MTC videos: http://www.iloveknk.com/support/mtc-support/
  Latest MTC User Manuals: http://www.iloveknk.com/Support/user-manuals/

  1 · Share on FacebookShare on Twitter
• Chubby_Ninja Member Posts: 55

  October 2017

  MTC works in High Sierra 10.13.1 beta version 2 - I'm an OS X Beta Tester by the way.

  iMac 27inch Late 2015 Fully Loaded, Dell Inspiron 5767 17inch laptop.
  Affinity Designer, Illustrator CC, Inkscape, Sketchup, C4D, Blender.
  

  2 · Share on FacebookShare on Twitter
• firestorm531 Member Posts: 179

  November 2017

  Worked for me too!

  Jen
  Mac OS
  http://www.firestormdesigns.com
  I got ZINGed and I like it!
  Creativity is Intelligence Having FUN! - Albert Einstein

  1 · Share on FacebookShare on Twitter
• Dae Member Posts: 13

  December 2017

  Just upgraded last night and MTC will launch but no window pops up.
  
  Any help would be much appreciated.
  

  0 · Share on FacebookShare on Twitter
• SandyMcC Member Posts: 7,858

  December 2017

  Try the top link here:   http://www.iloveknk.com/Support/Tutorials/Make-The-Cut/
  
  

  Sandy McCauley
  Cutting with KNK Force, Maxx Air, Zing Orbit, Skycut C and D
  Over 90 free MTC videos: http://www.iloveknk.com/support/mtc-support/
  Latest MTC User Manuals: http://www.iloveknk.com/Support/user-manuals/

  0 · Share on FacebookShare on Twitter
• sheudo Member Posts: 8

  January 2018

  Sandy McCauley thank you so much.  You are wonderful.  I was about to lose my mind.  Thank you for sharing your knowledge with us.
  
  

  0 · Share on FacebookShare on Twitter
• SandyMcC Member Posts: 7,858

  January 2018

  sheudo said:

  Sandy McCauley thank you so much.  You are wonderful.  I was about to lose my mind.  Thank you for sharing your knowledge with us.
  
  

  You're welcome!

  Sandy McCauley
  Cutting with KNK Force, Maxx Air, Zing Orbit, Skycut C and D
  Over 90 free MTC videos: http://www.iloveknk.com/support/mtc-support/
  Latest MTC User Manuals: http://www.iloveknk.com/Support/user-manuals/

  0 · Share on FacebookShare on Twitter
• louieb32 Member Posts: 3

  February 2018

  I have upgraded my Mac to 10.13.3 High Sierra and can open and use MTC fine, but i cannot get my KNK Maxx to cut. It comes up with an error message: 
  
  "An error occurred when trying to communicate to the target device:
  Lock violation"
  
  Can anyone help with this error?  Need to cut something urgently.
  
  Thanks.

  0 · Share on FacebookShare on Twitter
• SandyMcC Member Posts: 7,858

  February 2018

  Maybe try reinstalling the FTDI driver from the following link. Unplug your Maxx from your Mac and after installing, restart your Mac.  Then plug in the Maxx and cross your fingers.
  
  http://www.ftdichip.com/Drivers/D2XX.htm
  
  

  Sandy McCauley
  Cutting with KNK Force, Maxx Air, Zing Orbit, Skycut C and D
  Over 90 free MTC videos: http://www.iloveknk.com/support/mtc-support/
  Latest MTC User Manuals: http://www.iloveknk.com/Support/user-manuals/

  0 · Share on FacebookShare on Twitter
• SandyMcC Member Posts: 7,858

  February 2018

  I tested mine out this morning and I did have to rebridge the Maxx. So,  just open the bridge program and, under COM 1, select perhaps the other USBSerial listing. I saw two so I just picked the other one and clicked on Save.  Then MTC communicated with my Maxx just fine.

  Sandy McCauley
  Cutting with KNK Force, Maxx Air, Zing Orbit, Skycut C and D
  Over 90 free MTC videos: http://www.iloveknk.com/support/mtc-support/
  Latest MTC User Manuals: http://www.iloveknk.com/Support/user-manuals/

  1 · Share on FacebookShare on Twitter
• ebenostby Member Posts: 1

  June 2018

  Thanks for the tips. For my newer macbook, I had to download the driver (currently 2.4.2) from http://www.ftdichip.com/Drivers/VCP.htm - that restored my ability to communicate with the Zing.
  
  

  1 · Share on FacebookShare on Twitter