My cutter won't cut

beyondthefringecraft · November 2016

Hi! My Black Cat Lynx Cutter won't cut for me. I have checked all the cables. I know the cutter works because I was able to do the test cut. I have used 2 different USB cords, one which also works with my printer, so it is fine too. The USB driver is installed. I am using SCAL2 for my cut files. I haven't used the cutter in a while and I really don't know what I'm doing wrong. I could really use some help!! It's probably something simple, but I'm at a loss at the moment.

leslie6111 · November 2016

@beyondthefringecraft although some of our members have Black Cat Lynx cutter, this is really a forum geared to using the software Make the Cut! with our cutters. You might get faster help calling the manufacturer of silver bullet cutters - http://thatsscrapinc.com/contact-us.aspx or asking around on the scal forum since that is the software that comes with the machine.

beyondthefringecraft · November 2016

Okay, thank you!

SandyMcC · November 2016

If you are not getting error messages and you can see a USB-Serial connection under Port in the Cut Settings windows, then confirm that the Baud Rate matches between the software and the cutter itself. The Baud Rate would be found by pressing Menu once.

My cutter won't cut

Answers

Howdy, Stranger!

Quick Links

Categories