We are running a sale on Popup Card Studio. Save 28% right now during this very limited time sale. Click here to order now!

We are also running a sale if you purchase both Make The Cut! and Popup Card Studio. Save 38% right now during this very limited time sale. Click here to order!

June 3rd Webinar [Over] - What questions or topics do you have?

SBryanWSBryanW Administrator Posts: 5,293
edited June 2014 in General
Hello everyone,

Each week, I will start a thread a couple of days before the webinar as a place to write you questions and topics for the Q&A Webinar that week. This won't guarantee that every question and topic will be answered or covered, but it will at least give us a starting point for the webinar.

This is the thread for the Q&A Webinar on June 3rd. You can register for this webinar at:
Tue, June 03, 2014 8:30 PM - 10:00 PM EDT

This will be for both MTC and PCS (Popup Card Studio). The latest version of MTC and PCS will be used in this Q&A

The list of June Q&A Webinars that you can register for can be found in this thread:
http://forum.make-the-cut.com/discussion/5523/

Type in your questions or topics below, but here are some RULES for this thread:
- Keep the questions/topics specific (e.g. do NOT ask "How do I use MTC?")
- Try to keep each post to one question/topic or a group of related questions/topics. If you have more than one unrelated question/topic, then add another post.
- Keep the wording in the post to the question/topic and any necessary detail
- If there is an existing thread that is dealing with the question/topic, and you feel that it would be a good question/topic to cover in the webinar, then post a link to that thread along with the question/topic.
- Do NOT post if you are not asking a specific question/topic (e.g. no "Me too!", "Great idea", or "That was covered before" type posts)
- If you see someone post a question/topic that you can help with before the webinar, feel free to work with them, but NOT on this thread - start a new thread or send them a PM or email.
- Try to remember, when you are posting a question/topic, that we can only show what is on our screen. We can't share images of off screen things we are doing (loading the cutter, paper, etc.).
- If you have a file that goes with the question/topic, then feel free to post it also. Please do NOT post copyrighted files (links to the original website would be OK).

I may have to add more rules [am I starting to sound like a tyrant yet ;-)], but that is probably enough for now. I am trying to keep this thread simple and succinct so that it can be a manageable tool used to improve our Q&A Webinars. Therefore, I will be EDITING and/or DELETING posts in this thread to keep them manageable and within the rules above. I am human, and will probably edit/delete too much in someone's eyes at some point, but please realize that I am doing so to keep things manageable. Please do not take offense at my edits/deletions. If you have an issue with what I did (or didn't do), please let me know at my email address (posted in my profile) or send me a PM.

This will not be the only venue for questions/topics for the webinar - we will also still continue using the question area in the webinar itself.

OK, If I haven't scared everyone off with my tyrannical rules...
Let the games, I mean questions, begin...
Post edited by SBryanW on

Comments

  • SBryanWSBryanW Administrator Posts: 5,293
    FYI: Questions can be for either MTC and the new Popup Card Studio (PCS). The latest version of MTC and PCS will be used during this Q&A.

    An added request: If you don't mind, please type your name in your post so that we know who to talk to during the webinar, and also indicate whether or not you have a microphone in case we want to talk through your question...

    Thanks,
    Bryan
  • mak44070mak44070 Member Posts: 8
    There's a discussion on how to draw, print, then emboss on this thread:http://forum.make-the-cut.com/discussion/comment/425197#Comment_425197
    Could someone please demonstrate??
    thanks,
    mary ann kelly, no microphone
  • bluebirdflatsbluebirdflats Member Posts: 28
    edited May 2014
    Is there a center cut option coming in any version of MTC? I would like the option to move my blade anywhere on my mat, hit the center cut button, hit start and have MTC start the cut in the exact spot my blade is in. This was the only option the Cricut had that I truly appreciated and would be fabulous for quickly using those small scraps of paper or vinyl. Cindy Close - no microphone
  • 1cardcreator1cardcreator Member Posts: 852
    I am attaching a file of free stencils I am trying to make into real stencils. I understand the Pixel trace part of it. I want to learn what the difference is on these and how to recognize the difference and work on it. They all seem to be the same but they don't all cut into stencils, some have way too many parts. Some are good if I do a break and remove the background, but that does not work for all. I would like to learn how to recognize what is what on my mat if that makes sense. You don't have to get to all of them, but they all seemed to pose different situations. I have run into this on other projects, not understanding what is what. Thanks, Diane, aka 1 cardcreator, no mike.
  • grandmamsiegrandmamsie Member Posts: 12
    I cannot get MTV thumbnail viewer to work on my Dell tablet which runs on Windows 8.1. I do not find the accessory programs folder that shows up in prior versions.
    Do you know of a Tutorial which teaches MTC use with Windows 8.1. ? Or the use of MTC with a tablet and stylus?
    Thank you so much or the wonderful webinars You host each week. Although I am such a novice I always learn something useful from you and the other artists who work your magic on MTC and PCS.
    No microphone available
    Sue
  • SBryanWSBryanW Administrator Posts: 5,293
    1. Please join my Webinar.
    https://www1.gotowebinar.com/register/727910465

    2. You will be connected to audio using your computer's microphone and speakers (VoIP). A headset is recommended.

    Or, you may select "Use Telephone" after joining the Webinar.

    Dial +1 (702) 489-0003
    Access Code: 167-044-339
    Audio PIN: Shown after joining the webinar

    Webinar ID: 727-910-465

    GoToWebinar®
    Webinars Made Easy®
This discussion has been closed.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!