Webinar Recordings on Vimeo [Updated 2016-04-27]

SBryanW

Q&A Webinars from 2015 & 2016

04/26/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
04/19/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
04/12/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
04/05/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
03/29/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
03/22/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
03/15/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
03/08/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
03/01/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
02/23/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
02/16/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
02/09/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
02/02/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
01/26/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
01/19/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
01/12/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
01/05/2016 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
12/29/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
12/22/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
12/15/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
12/08/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
12/01/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
11/24/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
11/17/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
11/10/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
11/03/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
10/27/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
10/20/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
10/13/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
10/06/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
09/29/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
09/22/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
09/15/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
09/08/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
09/01/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
08/25/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
08/18/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
08/11/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
08/04/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
07/28/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
07/21/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
07/14/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
07/07/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
06/30/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
06/23/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
06/16/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
06/09/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
06/02/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
05/26/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
05/19/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
05/12/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
05/05/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
04/28/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
04/21/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
04/14/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
04/07/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
03/31/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
03/24/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
03/17/2015 - Q&A - Used MTC v4.6.2 and PCS v1.1.0
03/10/2015 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
03/03/2015 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
02/24/2015 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
02/17/2015 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
02/10/2015 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
02/03/2015 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
01/27/2015 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
01/20/2015 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
01/13/2015 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
01/06/2015 - Q&A - Used MTC v4.6.1 and PCS v1.1.0

SBryanW

Q&A Webinars from 2011 and 2012 on Vimeo

We are now using Vimeo to post our webinars.

07/26/2011 - Q&A
08/02/2011 - Q&A
08/09/2011 - Q&A including the Zing Q&A with Andy and Chad.
08/16/2011 - Q&A
08/23/2011 - Q&A
08/30/2011 - Q&A
09/06/2011 - Q&A
09/13/2011 - Q&A Part 1 - Andy demonstrating new 4.0 features
09/13/2011 - Q&A Part 2 - Andy answering questions about 4.0 features
09/20/2011 - Q&A
09/27/2011 - Q&A
10/04/2011 - Q&A
10/11/2011 - Q&A
10/18/2011 - Q&A
10/25/2011 - Q&A
11/01/2011 - Q&A
11/08/2011 - Q&A
11/15/2011 - Q&A
11/22/2011 - Q&A
11/29/2011 - Q&A
12/06/2011 - Q&A
12/13/2011 - Q&A
12/20/2011 - Q&A
12/27/2011 - Q&A
01/03/2012 - Q&A
01/10/2012 - Q&A
01/17/2012 - Q&A
01/24/2012 - Q&A
01/31/2012 - Q&A
02/07/2012 - Q&A
02/14/2012 - Q&A
02/21/2012 - Q&A
02/28/2012 - Q&A
03/06/2012 - Q&A
03/13/2012 - Q&A
03/20/2012 - Q&A
03/27/2012 - Q&A
04/03/2012 - Q&A
04/10/2012 - Q&A
04/17/2012 - Q&A
04/24/2012 - Q&A
05/01/2012 - Q&A
05/08/2012 - Q&A
05/15/2012 - Q&A
05/22/2012 - Q&A
05/29/2012 - Q&A
06/05/2012 - Q&A
06/12/2012 - Q&A
06/19/2012 - Q&A
06/26/2012 - Q&A
07/03/2012 - Q&A
07/10/2012 - Q&A
07/17/2012 - Q&A
07/24/2012 - Q&A
07/31/2012 - Q&A
08/07/2012 - Q&A
08/14/2012 - Q&A
08/21/2012 - Q&A
08/28/2012 - Q&A
09/04/2012 - Q&A
09/11/2012 - Q&A
09/18/2012 - Q&A
09/25/2012 - Q&A
10/02/2012 - Q&A
10/09/2012 - Q&A
10/16/2012 - Q&A
10/23/2012 - Q&A
10/30/2012 - Q&A
11/06/2012 - Q&A
11/13/2012 - Q&A
11/20/2012 - Q&A
11/27/2012 - Q&A
12/04/2012 - Q&A
12/11/2012 - Q&A
12/18/2012 - Q&A (Andy's demo of new 4.3.0 features)

SBryanW

Q&A Webinars from 2010 and 2011

Here is the older webinar information:


Hi Everyone!

Well, these Webinars have been pretty successful so far!

I am working out a schedule for future webinars -- I want to do at least 2-3 a month from here on out. And the offer still stands if anyone wants to run one.

I decided not to edit the video that was recorded. It would take too much time. So I just uploaded all of them as-is.

If anyone wants to edit the videos, take pieces out which are important, upload parts to youtube, etc -- you have free reign over the content.

03/25/2010 - 1st webinar run by Andy (Import a coloring page and split it in to layers)
04/27/2010 - April webinar (Part 1) run by Julie (Converting file formats)
04/27/2010 - April webinar (Part 2)
05/04/2010 - 3rd webinar run by Julie (Make a cat from scratch using MTC)
05/18/2010 - Converting: Stencil to cutting format and PDF Template to cutting format by Julie
06/09/2010 - Quick 2.3.0 intro by Andy
06/09/2010 - Basic Inkscape For Cutting Files (Part 1)
06/09/2010 - Basic Inkscape For Cutting Files (Part 2)
06/17/2010 - Adobe Illustrator Webinar by Tyler
06/23/2010 - What's new in Version 2.3.2 (Part 1)
06/23/2010 - What's new in Version 2.3.2 (Part 2)
07/07/2010 - Weekly Q&A (1st recorded one)
07/14/2010 - Weekly Q&A (Part 1)
07/14/2010 - Weekly Q&A (Part 2)
07/20/2010 - Weekly Q&A
11/09/2010 - Weekly Q&A (Part 1)
11/09/2010 - Weekly Q&A (Part 2: Julie - Word Book)
11/30/2010 - Weekly Q&A
12/07/2010 - Weekly Q&A (Part 1)
12/07/2010 - Weekly Q&A (Part 2)
12/14/2010 - Weekly Q&A (Part 1)
12/14/2010 - Weekly Q&A (Part 2)
12/21/2010 - Weekly Q&A
12/28/2010 - Weekly Q&A
01/18/2011 - Weekly Q&A
01/25/2011 - Weekly Q&A
02/01/2011 - Weekly Q&A
02/08/2011 - Weekly Q&A
04/26/2011 - Weekly Q&A
05/03/2011 - Weekly Q&A
05/10/2011 - Weekly Q&A (Part 1)
05/10/2011 - Weekly Q&A (Part 2)
05/17/2011 - Weekly Q&A
05/24/2011 - Weekly Q&A
05/31/2011 - Weekly Q&A
06/07/2011 - Weekly Q&A
06/14/2011 - Weekly Q&A
06/21/2011 - Weekly Q&A
06/28/2011 - Weekly Q&A
07/05/2011 - Weekly Q&A
07/12/2011 - Weekly Q&A
07/19/2011 - Weekly Q&A

It is recommended that you download the files to your computer first, and then open them in Windows Media Player. To download the files, right click on the link of the webinar you want to download, and choose "Save Target As..." (Internet Explorer) or "Save Link As..." (Firefox). Choose where you want to save the file to, and then click on the "Save" button.

Again, thank you to EVERYONE that hung out and listened to us!

-andy.

SBryanW

Webinar Index: Back at the end of December, bchbumgus put together a spreadsheet of the 2013 Q&A Webinars sorted by subject and posted it in the following thread:
http://forum.make-the-cut.com/discussion/36289/webinar-index/p0

This has been added because it was requested that a link be put in this thread so that it can be easily found. Please note that at this time, it is only for the 2013 Q&A Webinars.

UPDATE 2014-11-25: Here is the link to the thread for the 2012 Webinar Index:
http://forum.make-the-cut.com/discussion/40556/webinar-index-2012

UPDATE 2015-02-14: Here is the link to the thread for the 2014 Webinar Index:
http://forum.make-the-cut.com/discussion/41162/2014-webinar-index

Thank you @bchbumgus

SBryanW

Q&A Webinars from 2013

We are now using Vimeo to post our webinars.

01/01/2013 - Q&A
01/08/2013 - Q&A
01/15/2013 - Q&A
01/22/2013 - Q&A
01/29/2013 - Q&A
02/05/2013 - Q&A
02/12/2013 - Q&A - MTC v4.4.0
02/19/2013 - Q&A - used MTC v4.4.0
02/26/2013 - Q&A - used MTC v4.5.0
03/05/2013 - Q&A - Used MTC v4.5.2
03/12/2013 - Q&A - Used MTC v4.5.2
03/19/2013 - Q&A - Used MTC v4.5.2
03/26/2013 - Q&A - Used MTC v4.6.1
04/02/2013 - Q&A - Used MTC v4.6.1
04/09/2013 - Q&A - Used MTC v4.6.1
04/16/2013 - Q&A - Used MTC v4.6.1
04/23/2013 - Q&A - Used MTC v4.6.1
04/30/2013 - Q&A - Used MTC v4.6.1
05/07/2013 - Q&A - Used MTC v4.6.1
05/14/2013 - Q&A - Used MTC v4.6.1
05/21/2013 - Q&A - Used MTC v4.6.1
05/28/2013 - Q&A - Used MTC v4.6.1
06/04/2013 - Q&A - Used MTC v4.6.1
06/11/2013 - Q&A - Used MTC v4.6.1
06/18/2013 - Q&A - Used MTC v4.6.1
06/25/2013 - Q&A - Used MTC v4.6.1
07/02/2013 - Q&A - Used MTC v4.6.1
07/09/2013 - Q&A - Used MTC v4.6.1
07/16/2013 - Q&A - Used MTC v4.6.1
07/23/2013 - Q&A - Used MTC v4.6.1
07/30/2013 - Q&A - Used MTC v4.6.1
08/06/2013 - Q&A - Used MTC v4.6.1
08/13/2013 - Q&A - Used MTC v4.6.1
08/20/2013 - Q&A - Used MTC v4.6.1
08/27/2013 - Q&A - Used MTC v4.6.1
09/03/2013 - Q&A - Used MTC v4.6.1
09/10/2013 - Q&A - Used MTC v4.6.1
09/17/2013 - Q&A - Used MTC v4.6.1
09/24/2013 - Q&A - Used MTC v4.6.1
10/01/2013 - Q&A - Used MTC v4.6.1
10/08/2013 - Q&A - Used MTC v4.6.1
10/15/2013 - Q&A - Used MTC v4.6.1
10/22/2013 - Q&A - Used MTC v4.6.1 NOTE: Video and Audio get out of sync.
10/29/2013 - Q&A - Used MTC v4.6.1 NOTE: Video and Audio get out of sync.
11/05/2013 - Q&A - Used MTC v4.6.1
11/12/2013 - Q&A - Used MTC v4.6.1
11/19/2013 - Q&A - Used MTC v4.6.1
11/26/2013 - Q&A - Used MTC v4.6.1
12/03/2013 - Q&A - Used MTC v4.6.1
12/10/2013 - Q&A - Used MTC v4.6.1
12/17/2013 - Q&A - Used MTC v4.6.1
12/31/2013 - Q&A - Used MTC v4.6.1

SBryanW

Q&A Webinars from 2014

2014 Webinar Index - see this thread:
http://forum.make-the-cut.com/discussion/41162/2014-webinar-index

01/07/2014 - Q&A - Used MTC v4.6.1
01/14/2014 - Part 1 Q&A - Popup Card Studio 1.0.1
01/14/2014 - Part 2 Q&A - Popup Card Studio 1.0.1
01/21/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
01/28/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
02/04/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
02/11/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
02/18/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
02/25/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
03/04/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
03/11/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
03/18/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
03/25/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
04/01/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
04/08/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
04/15/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
04/22/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
04/29/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
05/06/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
05/13/2014 - Q&A - Used MTC v4.6.1 and PCS v1.0.1
05/20/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
05/27/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
06/03/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
06/10/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
06/17/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
06/24/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
07/01/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
07/08/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
07/15/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
07/22/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
07/29/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
08/05/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
08/12/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
08/19/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
08/26/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
09/02/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
09/09/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
09/16/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
09/23/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
09/30/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
10/07/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
10/14/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
10/21/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
10/28/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
11/04/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
11/11/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
11/18/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
11/25/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
12/02/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
12/09/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
12/16/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
12/23/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0
12/30/2014 - Q&A - Used MTC v4.6.1 and PCS v1.1.0

SBryanW

I added links for the following webinar:

04/26/2016 Q&A Webinar - Make The Cut! and Popup Card Studio

See first post.

Also, a big THANK YOU!!! to MeFlick, Di-lite, Elaine, and Julie who have provided the timestamps and description of topics covered in the Q&A Webinars.  Thank you Elaine, Melanie, and Julie for your help!

Go check out those webinars to see what I mean!