We are also running a sale if you purchase both Make The Cut! and Popup Card Studio. Save 38% right now during this very limited time sale. Click here to order!
MtC and KNK Zing - Print and Cut alignment issue with Y axis
HPMHobbies
Member Posts: 1
Hi All
I have a very strange issue. When we try to align the laser with the registration marks, all works well when moving the X axis. When I move the Y axis toward from Y0, all is OK. It will move the number of steps in the control box. When I try to move it away from Y0, it immediately jumps to Y0. Changing the steps in the control box, or using mouse click or keyboard cursors makes no difference.
The micro jogging works fine in both X & Y for setting blade origin.
I have updated the drivers and Zing Plugin to the latest versions.
Any suggestions? I can't see any similar posts in the forums.
Thanks in advance
Christopher
I have a very strange issue. When we try to align the laser with the registration marks, all works well when moving the X axis. When I move the Y axis toward from Y0, all is OK. It will move the number of steps in the control box. When I try to move it away from Y0, it immediately jumps to Y0. Changing the steps in the control box, or using mouse click or keyboard cursors makes no difference.
The micro jogging works fine in both X & Y for setting blade origin.
I have updated the drivers and Zing Plugin to the latest versions.
Any suggestions? I can't see any similar posts in the forums.
Thanks in advance
Christopher
This discussion has been closed.
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Comments
Cutting with KNK Force, Maxx Air, Zing Orbit
Need help with your KNK? Visit this link: http://knkusa.com/contact/
Over 90 free MTC videos: http://www.iloveknk.com/support/mtc-support/
Latest KNK / MTC User Manuals: http://www.iloveknk.com/Support/user-manuals/